My demo reel is finally complete, you can view the High Res version here:
http://www.sherrielaw.com/demoreel.php (quicktime 62mb)
http://student.vfs.com/~3d73sherrie/ (quicktime 62mb MIRROR)

and the Low Res version:
http://www.vimeo.com/3359933 (Low Res)


Below are some high res still images:

It's been a while since I last blogged... all this time I have been working on finishing the character and the bike as the final deadline is only less than 3 weeks away.

While I was hard at work tweaking my character's face and studying my references, this brilliant area flashed across my mind to comp the boy into my favourite reference photo from Lewis Hine of a group of newsies. The lighting is wrong and the comp is not great, but it was just for a bit of fun. So without further ado:

Since a friend of mine requested it, here's some WIP (Work in Progress) of the bike and character I'm doing for my demo reel.

I haven't mentioned this before, but with these screenshots it should be fairly apparent that my reel belongs to the steampunk genre. Anyways, here they are:


Newsie Boy Concept


Head Mesh Shaded


Head Mesh Wireframe


WIP Zbrush Sculpt for Wrinkles


WIP Zbrush Sculpt for Wrinkles


WIP Zbrush Sculpt for Wrinkles


Flying Bike Concept


Flying Bike Wip Geo

At VFS we spent the first 3 terms learning bits and piece of everything about 3D, and then we spend the last 3 terms for full-time production of our demo reel (final project). And I've been so busy, now I finally got time to post what I've been doing so far on my demo reel.

I am doing a modeling reel and part of it is an environment. I have been working on the environment since the beginning of term 4 and I tried my best to bring it to full competition before I move on to other elements of my project. It is very easy to lose patience when doing 3D and half the battle is sticking to the plan.

I'm proud to say that I have stuck to the plan til the end and fairly satisfied with the results. Still needs more work but it is around 95% complete. I am just going to post several images of the major milestones I have made, so you get an idea how far I have progressed:


Scene would not render. Rendered buildings in 4 passes with default lighting and comped them together for presentation.


Whole scene rendered after scene cleanup and displacement optimization. Had major gamma problems here. Lighting was affected due to the gamma problems. Bummer.


Corrected the gamma. Near-final render settings. Preliminary test of some dirt layers, water, and plants. Tried rendering the whole sequence and found MEGA displacement popping and final gathering flickers. Bummer.


All dirt maps completed. Fixed the displacement popping. Fixed problem with too much light inside buildings. Still have some flickers but close to competition.

Other Stills:

Some of my better life drawing done while at VFS (terms 2 & 3). I've definitely seen a lot of artistic improvement while at VFS, not just drawing, but as as artist in general.

This is the second (and last) modeling assignment for term 3 - to model a caricature of ourselves.

I decided to make my Simpson-Me that I made through Burger King's simpsonizeme.com, because I really did like how it turned out. I think it does feel a lot like me, and its hard to draw a better caricature of myself.

I think the model turned out pretty well, nice and simple and clean.



Orthographic views


Wireframe

Long time no update, I'm just gonna slap on a bunch of stuff from term 3 to 4 that I should have posted earlier.

I wanted to set up a local video player so I don't have to post all this bad stuff on youtube, but I just never had the time. So here goes:


Ball Push


Baseball Pitch & Bat


Lip Sync 1


Lip Sync 2

The first assignment for modeling in term 3 was a group project -- modeling a scene somewhere in Vancouver with post-apocalyptic robot remains. Our group chose a spot in Gastown, the thin building is called the "Europe Hotel". Texturing was not required.


Ambient Occlusion

For texturing class, we get to choose our own project and work on something usable or at least beneficial for the development of our demo reel. I really wanted to test out the SSS skin shader before I use it on my demo reel character, since I have never used the shader before. I used the face mesh of my Jack Sparrow model for the assignment. I struggled a bit with the skin shader but also learned a lot from this exercise, as a result I only got around to texturing the skin and nothing else.

Besides the fact that its incomplete, I am quite happy with the result with using only a bump map. I also got a bit of XSI hair on the face to give it a hint of Jack Sparrow.

It's been a while since my last post. Term 3 was hectic, we did a lot yet it feels like I don't have much to show -- simply because we spent most of the energy on developing ideas towards our final short film the "demo reel". At this point the reel ideas are still in its infancy and nothing solid to show yet, so I am just going to do a quick roundup of the very few assignments we did for term 3.

The assignment for lighting class is fairly self-explanatory, we had to light the same room (provided by the instructor) in a daylight setting and a nighttime setting. I did learn quite a few things from this assignment regarding choice of lights and settings, so here they are:


Daylight Scene


Night Time Scene

This is the first half of a baseball assignment, the pitch (the bat will follow later). I have to say I am fairly happy with this because this is probably my best animation assignment so far (I'm still learning of course....).

A roundup of the 3D animation I did for term 2, these are not very good but I decided to post them anyway. The pose-to-pose are modeled from actual people posing in the classroom.


Pose-to-Pose II


Pose-to-Pose I


Jump


Box Lift

For our intro lighting classes, we had to light a given scene to match a given reference by using as little lights as possible. I paid special attention to this assignment as I want to excel in lighting, because bad lighting can make the best model with the best textures look like bad 3D.


I used 4 lights in this scene (all spot): 1 main light, 1 rim light, 1 fill light, and 1 extra fill light for the character.


I used 4 lights in this scene also: 1 main light (spot), 1 fill light for the atmosphere (infinite), 1 fill light for bounced light (infinite), 1 extra fill for bounced light from another angle (infinite)

My unwrap and texture maps for the airplane I posted earlier.

Link to the original post:
3D Texturing: Airplane (Part I)


Unwrap


Diffuse Map


Bump Map


Reflect Map


Spec Map


Transparency Map

Just thought I would post all my term 2 classical assignments at once. The requirements for these assignments were quite simple, just make the actions work (cape jump, swing, box lift, reaction). I always added extra imagination to my animations just to make the assignments more interesting to do. As you can see, I put in a cameo of my killer rabbit for assignment 4.


Assignment 4: Reaction


Assignment 3: Box Lift


Assignment 2: Swing


Assignment 1: Cape Jump